How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE, Ford Senior Master/Diesel/Trans
Category: Ford
Satisfied Customers: 5711
Experience:  25 years Auto experience, Ford ,GM, Chrysler, Asian & European
Type Your Ford Question Here...
HDGENE is online now
A new question is answered every 9 seconds

2008 Ford Taurus x Sel...we are attempting to rebuild the

Customer Question

2008 Ford Taurus x Sel...we are attempting to rebuild the unitand it has codes PO 720 output speed sensor circuit fault and po 722 output speed sensor; techs recommend replace valve body with the tcm and output speed sensor. This sound like a reasonable solution to repair a transmission issue
Submitted: 1 year ago.
Category: Ford
Expert:  HDGENE replied 1 year ago.

Hello, is this a 6F50 transmission? if so I would replace the oss and tss sensors since both can cause issues and the valve body needs to be removed to replace the tss sensor. I wouldnt replace the tcm unless it has a hard fault code issue, tss and oss sensors fail often. not sure why you have trans torn down otherwise.Only other main issues ive seen with them is torque convertor replacement due to shudder

Expert:  HDGENE replied 1 year ago.

hello, do you need more help with this concern?