How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 47964
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Shawn, I have the following codes in addition to u1900 C1277

Customer Question

Hi Shawn,
I have the following codes in addition to u1900
C1277 Steering Wheel Angle 1 and 2 Circuit Failure
C1285 Booster Solenoid Circuit Failure
C1287 Booster Pedal Force Switch Circuit Failure
Can you please help?
Submitted: 1 year ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I am Chris (aka-Moose)

I do have the Ford pinpoint tests for these codes, is that what you need?

Do not go the route of parts guessing, that is expensive.

----------Once you get an answer----------

1) Please realize I base my info requests and answers on what you type.

2) The more you can tell me the faster and better I can help.

3) I am not an employee for Just Answer, they pay me nothing to help you.

4) I am paid by the customer from your deposit, but only when you rate my answer.

5) You will notice it says rate to finish, rating does not close the post, or end our conversation.

6) I am going to stay in contact with you until you respond and tell me your happy or pleased with the answer. So please reply and let me know the progress on the issue and our discussion or if more help is needed.

Thanks Chris

Customer: replied 1 year ago.
I don't intend to go the guessing route and that's the exact reason I am here
Yes the pin point tests will help indeed. Also do these tests explain what and where to look for the parts to be tested (on the vehicle)?
Expert:  Chris (aka- Moose) replied 1 year ago.

See the links below which are the tests.

Look them over and let me know what follow up questions you have.

Customer: replied 1 year ago.
Thank you Chris for the pin point tests.
Can you please help me with u1900?
Expert:  Chris (aka- Moose) replied 1 year ago.

Do you know which module stored that communication code? Quite often communication codes occur from using a generic scan tool.

Customer: replied 1 year ago.
I am not sure about the module. I am using obdlink mx with torque pro app to get the information.
Expert:  Chris (aka- Moose) replied 1 year ago.

In that case its best to complete the diag steps for the other codes first, then once done clear the codes and see if any codes return.

Expert:  Chris (aka- Moose) replied 1 year ago.

As mentioned in my first response, I would stay in contact with you. I've noticed you have not rated the post. So I assume you were not pleased with my help. I hate that you have spent money to get an answer but left not happy. Can you tell me why, or can I help more. If its more help you need just reply and we can pick up where we left off.