How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

My entire dash cluster is dead. No gauges at all

Customer Question

My entire dash cluster is dead. No gauges at all
Submitted: 1 year ago.
Category: Ford
Expert:  A. Penland replied 1 year ago.

You will need to check for ground to the instrument cluster connector. The ground is for all the warning lights and the gauges.

Below is the connector picture with the wiring diagram for the connector.

Pin #1 should be ground

Pin #5 should be ground

Pin #11 should be power with the key turned on.

Check these pins and please let me know if you have the powers and grounds.