How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE MasterTechnician
Category: Ford
Satisfied Customers: 12832
Experience:  35 years ASE Master Tech, Diagnostic , Electrical Specialist
Type Your Ford Question Here...
Randall C is online now
A new question is answered every 9 seconds

2008 Ford Explorer Sportrac Limited. V6 4.0 L. P0107 code.

Customer Question

2008 Ford Explorer Sportrac Limited. V6 4.0 L. P0107 code. Replaced MAF, replaced vacuum lines to EGR, cleaned contacts on MAF and EGR connector. DTC describes a MAP sensor error or connection error. This vehicle does not have a MAP. Any ideal where to go from here?
Submitted: 2 years ago.
Category: Ford
Expert:  Randall C replied 2 years ago.

Hello, actually you do have a MAP sensor, It is built into the EGR module, You have followed most common steps to trace/eliminate the code, the diagnostic flowchart is a bit lenghy and invloved, glad to send if you do not have it but in either case,I am leaning to 95% you have a bad EGR module,The MAP sensor portion is failed and setting the code