How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Bronco 302: , I'm hooking up a used mustang 302 wiring harness

Customer Question

Hi, I'm hooking up a used mustang 302 wiring harness to a 70 Bronco 302 to install efi on the bronco. I'm pretty far along (I think) but am stuck on how to hook up the coil. The coil plug is obviously gone. So were do the two coil wires go? wire color or pin number would be helpful. I'm trying to avoid going to the actual ignition switch as it is very crowded down there. I would like to hook up to something in the engine compartment or wiring harness.
Submitted: 2 years ago.
Category: Ford
Expert:  Ron replied 2 years ago.
Hello and thank you for your question, My name is ***** ***** I will assist you today.
Can you tell me what year Mustang the engine harness is out of?
Customer: replied 2 years ago.
88 or 89
Expert:  Ron replied 2 years ago.
Give me a moment to dig up the wiring diagram for you.