How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Mustang 4.0: 2006 mustang 4.0 need to know how to time the

Customer Question

2006 mustang 4.0 need to know how to time the dual overhead cams
Submitted: 2 years ago.
Category: Ford
Expert:  A. Penland replied 2 years ago.
Hello and thanks for using JustAnswer.I will try my best to help you with your question.
How far did you have the engine apart?
Customer: replied 2 years ago.
took front of motor apart replaced main timing chain front left chain , guide and cam gear. It's all out of time I know to bring #1 piston to TDC on compression stroke but the right and left overhead cams I done know how to put them in time I do have the tools required to loosen the cam bolts. Randy
Expert:  A. Penland replied 2 years ago.
The best way to give you this information is from the factory shop manuals for engine assembly. Below is a link you can print out.