How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Probe: 95 ford probe would turn over but not start. Friend

Customer Question

95 ford probe would turn over but not start. Friend unplugged starter and re plugged. Then pulled fuses and put back in. Now it just clicks and won't turn over. Suggestions?
Submitted: 2 years ago.
Category: Ford
Expert:  fordtechsuzukitech25 replied 2 years ago.
first make sure the connection at starter is tight and clean, then make sure the fuse is installed correctly, and last make sure battery is fully charged and battery cables are clean and tight
Customer: replied 2 years ago.
All done still only clicking
Expert:  fordtechsuzukitech25 replied 2 years ago.
if its the starter clicking try tapping on it with a hammer while someone try's to start vehicle, it should start atleast once while hitting it, if it does then you no