How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 2007 ford f450 with a 6.0 that running rough code

Customer Question

I have a 2007 ford f450 with a 6.0 that running rough code is p0276 injector circuit low cylinder #6 did a injector test on all injector disabled all of them one by one #6 was no change in rough idle.
Submitted: 2 years ago.
Category: Ford
Expert:  James replied 2 years ago.
Hello and thanks for choosing just answer. You are going to want to change injector #6 to correct your concern. This should make the vehicle run like new. Just remember the injector torque is very important. If the hold down is a t40 its 24ft lb. if the gold down is a t45 the torque is 26lb ft.