How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask A. Penland Your Own Question
A. Penland
A. Penland, Ford Senior Master Technician, ASE
Category: Ford
Satisfied Customers: 6563
Experience:  ASE Master Certified, ASE Advanced Gasoline Engine Performance
Type Your Ford Question Here...
A. Penland is online now
A new question is answered every 9 seconds

Crown vic police interceptor: I have a 2008 crown vic police

Customer Question

Hi I have a 2008 crown vic police interceptor
the #6 cylinder is miss firing.
Do I take the rubber boot out of the engine to get the plug out
the plug out
Submitted: 2 years ago.
Category: Ford
Expert:  A. Penland replied 2 years ago.

Hello and thanks for using JustAnswer.I will try my best to help you with your question.

The rubber boot should be attached to the coil. If it is stuck in the spark plug hole, use a pair of pliers and grab the boot and twist it in the hole till it turns and then remove it. Replace that boot. You can get them by themselves without the coil.