How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

F250: very high icp pressure 14,000 psi with white smoke starts

Customer Question

very high icp pressure 14,000 psi with white smoke starts then dies with a 100% load on motor at a idle
Submitted: 2 years ago.
Category: Ford
Expert:  James replied 2 years ago.
Hello and thanks for choosing just answer. When you have the key on engine off what does ICP read?
Customer: replied 2 years ago.
It reads 0 then when you try to start it and leave the key on it bleeds off very slow
Expert:  James replied 2 years ago.
Is this icp sensor mounted on the back of the high pressure oil pump? If it is was the oil sensor leaking oil into the connector?