How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48339
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Looking on a 1999 ford mustang 3.8

Customer Question

looking for chris b for help on a 1999 ford mustang 3.8 litter. a/c clutch will not engage i got 10 volts at clutch.i have jumped both pressure switches and its full of freon,could you show me how to check to see if a computer is bad are relay.are what
ever you think i need to check thanks.
Submitted: 2 years ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 2 years ago.
When there is only 10 volts are the compressor clutch, what is the voltage at the fuse for the AC relay? While running AC commanded on, use a broom handle and carefully push the AC clutch in, did it engage? If so that indicates the clutch air gap is excessive from wear. You want a excellent 5 star answer & I would like to be rated the same for providing it. Consider I don't know your skill level & I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies. Try your best to respond with good detail so I can do the same. I normally log in at 3pm and work late. A rating is required. Your rating me, what I type. I am not an employee of this website, nor have control over the fees or the time it took to get a response. If you rate negative or not at all you still paid, but I get nothing. I want you pleased with me and my efforts, so let me know if your experience here has come up short.Thanks Chris