How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48656
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Ford: My 2007 ford e150 started needing cylinder coils then

Customer Question

My 2007 ford e150 started needing cylinder coils then totally died and will not read code meter
Submitted: 2 years ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 2 years ago.
Chris here,What liter engine?Current miles?Are you saying it will not start and the diagnostic tool can not connect to the computer? You want a excellent 5 star answer & I would like to be rated the same for providing it. Consider I don't know your skill level & I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies. Try your best to respond with good detail so I can do the same. I normally log in at 3pm and work late. A rating is required. Your rating me, what I type. I am not an employee of this website, nor have control over the fees or the time it took to get a response. If you rate negative or not at all you still paid, but I get nothing. I want you pleased with me and my efforts, so let me know if your experience here has come up short.Thanks Chris
Customer: replied 2 years ago.
It's a 4.6 liter 150000 miles will not start nor read diagnostic meter
Customer: replied 2 years ago.
Is there a fuse that goes to main computer
Expert:  Chris (aka- Moose) replied 2 years ago.
With the key in the run position is the CEL check engine light on?While cranking is the CEL off?Is there battery power the DLC data link connector at one of the pins with the key in the run position?