How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Ford Crown Victoria: 1985 Ford 302 crown vic vacuum control

Customer Question

1985 Ford 302 crown vic vacuum control is not working - no or low vacuum pressure at PVC tube. How do I find the leak and repair broken plastic tubes? do the small tubes dampen the controls in any way, or will 1/4" rubber hoses work just fine. I have figure 69, but no translation of the codes on the diagram. Can't tell where the leak is located
Submitted: 2 years ago.
Category: Ford
Expert:  Mike S. replied 2 years ago.
So this is an LTD?
Expert:  Mike S. replied 2 years ago.
Who repaired the leaking head gasket?
Expert:  Mike S. replied 2 years ago.
the reason I ask is because I wanted to know who adjusted the valves and how.