How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35523
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

2014 F150 V8, 5.0: I am trying to hook up a gforce chip on

Customer Question

I am trying to hook up a gforce chip on my 2014 F150 with a 5.0 engine and need to know which wires to connect to.
Submitted: 2 years ago.
Category: Ford
Expert:  Ron replied 2 years ago.
Hello and thank you for your question, My name is ***** ***** I will assist you today.

At the MAT sensor you are going to hook the Chips up to the pin #4 (blue) signal return wire and the pin #2 (violet/gray wire) IAT signal. See the connector view in the link below.