How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask fordtechsuzukitech25 Your Own Question
fordtechsuzukitech25, Ford Technician
Category: Ford
Satisfied Customers: 98
Experience:  master ase certified,senior master ford certified
Type Your Ford Question Here...
fordtechsuzukitech25 is online now
A new question is answered every 9 seconds

E250: actually, I was pulling up procedures side

Customer Question

actually, I was pulling up procedures for replacing side and rear handles on a ford e250 and you popped up.
Submitted: 2 years ago.
Category: Ford
Customer: replied 2 years ago.
I'm mostly looking to see what fasteners will be needed to reattach and if there are any quick tricks to the labor - it looks like rivets on the current install, but I'm not sure what size.
Expert:  fordtechsuzukitech25 replied 2 years ago.
u will need to install rivets back in, I always take the new part with me to the parts store to get the rite size rivets