How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask A. Penland Your Own Question
A. Penland
A. Penland, Ford Senior Master Technician, ASE
Category: Ford
Satisfied Customers: 6667
Experience:  ASE Master Certified, ASE Advanced Gasoline Engine Performance
14865528
Type Your Ford Question Here...
A. Penland is online now
A new question is answered every 9 seconds

E250: My check engine light came on the codes in order areP061B

Customer Question

My check engine light came on the codes in order areP061B P2106. And P0320 whats wrong whit my 2005 E250
Submitted: 2 years ago.
Category: Ford
Expert:  A. Penland replied 2 years ago.
Hello and thanks for using JustAnswer.I will try my best to help you with your question.
The main code is P2106. The other codes are a result of that code.
P2106 - Throttle Actuator Control (TAC) System - Forced Limited Power.
is the definition of this code. It is caused by a malfunctioning throttle body. Replace the throttle body assembly and clear the codes.
Customer: replied 2 years ago.
I change the throttle body and the van still runs and shut off
Expert:  A. Penland replied 2 years ago.
Where did you get the throttle body?
Ford or auto parts store?
Customer: replied 2 years ago.
Ford
Expert:  A. Penland replied 2 years ago.
Disconnect the PCM for and the battery for 15 minutes. Then reconnect the PCM and then reconnect the battery. This should reset the PCM and clear everything out. Then see if the problem remains and the codes come back.
Customer: replied 2 years ago.
Yes idid that ann the codes still came back
Customer: replied 2 years ago.
The van just shut off when it gets hot
Expert:  A. Penland replied 2 years ago.
Check the crankshaft position sensor mounted next to the AC compressor on the front of the engine.