Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

2007 ford escape, timing chain installation issues when

Customer Question
2007 ford escape, timing chain...

2007 ford escape, timing chain installation issues when looking at crank gear it has a mark on the front and a mark on the rear of the sprocket do we align by just the front facing for both chains or do we use the rear for rear chain and front for front chain? have used all data and shop key for alignment procedures no luck. all pistons are moving properly and hold good compression.

Submitted: 3 years ago.Category: Ford
Show More
Show Less
Ask Your Own Ford Question
Answered in 1 hour by:
5/21/2015
Ford Mechanic: Wayne Crawford, Shop Owner replied 3 years ago
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Ford
Satisfied Customers: 4,138
Experience: General Repair Shop Owner
Verified
Hello. My name is ***** ***** I will be helping you today.What size engine does it have?
Ask Your Own Ford Question
Customer reply replied 3 years ago

v6 3.0L VIN# *****

Ford Mechanic: Wayne Crawford, Shop Owner replied 3 years ago
OK they both use the same mark and you can count the links between. I am attaching a diagram that shows you.
Ask Your Own Ford Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a ford mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Wayne Crawford Your Own Question
Wayne Crawford
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Ford
Satisfied Customers: 4,138
4,138 Satisfied Customers
Experience: General Repair Shop Owner

Wayne Crawford is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Related Ford Questions
I have a 2003 ford expedition 4.6. I am trying to install new
I have a 2003 ford expedition 4.6. I am trying to install new timing chains unfortunately when I when I removed the old chains, tensioners, ect the cams moved on me before I installed the new chains a… read more
Diesel Doc
Diesel Doc
Diesel Technician/Shop Foreman
High School or GED
2,495 satisfied customers
i am installing timing chains on 1999 ford taurus 24 valve
i am installing timing chains on 1999 ford taurus 24 valve dohc engine, my question is do both the left and right bank chain marked links line up at the same index mark on the front of crank shaft spr… read more
6Bucs
6Bucs
Senior Master Tech
Associate Degree
3 satisfied customers
Ford Mustang GT: I just replaced the timing chains/tensioners/chain
I just replaced the timing chains/tensioners/chain guides on my 2000 Mustang GT (4.6 SOHC). Now the car idles okay, but is sluggish under acceleration and seems to have a different exhaust sound to it… read more
b-kitchener
b-kitchener
Ford dealer senior master technician
Vocational, Technical or Trade Scho
206 satisfied customers
there two timing mark indicators on the camshaft sproket?..rebuilt
Why are there two timing mark indicators on the camshaft sproket? One is a diamond and the other a triangle. I just installed a rebuilt head on the engine and having truble figuring out the exact timi… read more
SuperDave
SuperDave
auto technician
101 college hrs
867 satisfied customers
2009 ford escape: replacing harmonic balancer..Crankshaft..manually
2009 ford escape 2.5 liter. replacing harmonic balancer seems like valve train was locked up so I removed timing cover. Crankshaft rotates but camshafts dont move unless I manually rotate them up by t… read more
Steve
Steve
Ford tech Specializing in electronics
Associate Degree
1 satisfied customers
Mustang: gt..no 1 piston to tdc. the heads are brand new..timing
I replaced the heads on my 2000 4.6 gt mustang and didnt set no 1 piston to tdc. the heads are brand new so not sure were the pistons sit as far as the timing goes. what can/should i do to make sure t… read more
John Crouch
John Crouch
lead senior master tech
Vocational, Technical or Trade Scho
1,383 satisfied customers
2000 ford f-150: i need instructions on timing the timing chains..4wd
i need instructions on timing the timing chains on 2000 ford f-150 4wd with 4.6 w engine. thanks!… read more
Randall
Randall
Auto Technician / Consultant
Vocational, Technical or Trade Scho
69 satisfied customers
1999 ford expedition: 5.4liter v8 if only one side..timing
1999 ford expedition 5.4liter v8 if only one side of timing is off do you have to reset the whole thing?… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
97 Town Car Cartier: vin..timing marks on the crank chain gears
97 Town Car Cartier 4.6L VIN W SOHC 2v - Engine rebuild - Cam timing How to set cam timing and install timing chains? Chilton manual not clear. It says to match the timing marks on the crank chain gea… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
Wagon: taurus..timing marks(on rear of cam gear)..chain..crank
working on a taurus wagon and timing marks(on rear of cam gear) are not lining up when new chain is set to marks on crank and cam sprcket fronts any help… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
92 F250: Hi,im working..timing chain..wheel drive..timing marks
Hi, I'm working on changing the timing chain on a 92 F250 7.5 LXXXXX I have not removed the chain yet. The timing marks both seem to be a half tooth to the left and there is alot of slack on the left … read more
EMRSR
EMRSR
High School or GED
138 satisfied customers
2000 ford: you set the two over head cams..litre..tensioner
how do you set the two over head cams in a 2000 ford 5.4 litre after installing new tensioner arms.they turned when i removed oilers… read more
Bamaman39
Bamaman39
Ford master diesel Tech.Ford certified
High School or GED
2,154 satisfied customers
I need the timing marks for a 2002 Ford Explorer 4.6L engine.
I need the timing marks for a 2002 Ford Explorer 4.6L engine. I am replacing the timing chain after it broke on the driver side of the engine.… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
2000 f 350: the timming marks for the timming chain
i am trying to lign up the timming marks for the timming chain. the marks shop key show me dont really corispond 2000 f 350 5.4 vincode L… read more
jeffchag
jeffchag
fleet manager
High School or GED
I have a 98 F-150 and I have replaced all of the valves and
I have a 98 F-150 and I have replaced all of the valves and head bolts and gaskets, I have a chiltons book but it doesnt say how to position the timing chain for the windsor engine, I have remarked th… read more
Tim
Tim
Ford Senior Master Technician
Vocational, Technical or Trade Scho
997 satisfied customers
2000 Mustang GT: In the process of changing the timing chains
In the process of changing the timing chains on my 2000 Mustang GT, I have lost the timing. How do I reset it?… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
Ford: a 1999 5.4 DOHC engine.We have new chains..cam..crank..tryed
We are trying to time a 1999 5.4 DOHC engine.We have new chains and did not remove the two small chains that go from cam to cam.We can''t get the two big chains from cam to crank correct. We do no hav… read more
mcc1228
mcc1228
Licensed Automotive Technician
Vocational, Technical or Trade Scho
44 satisfied customers
1997 F 250: I set the camshaft/crankshaft timing..TDC
I have a 1997 F 250- 5.4L motor. How do I set the camshaft/crankshaft timing. I changed the head gaskets and lost TDC on the cameshaft. I turned the motor by hand no interferance. I ran the motor, run… read more
FORDFXR
FORDFXR
MASTER TECHNICIAN
Vocational, Technical or Trade Scho
138 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x