How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask James Your Own Question
James, Ford Technician
Category: Ford
Satisfied Customers: 3630
Experience:  Ford Senior Master Tech, Ford gas and diesel expert, ASE Certified
Type Your Ford Question Here...
James is online now
A new question is answered every 9 seconds

F250: I have p0703 code in my 2010 Ford F-250 6.4l it says

Customer Question

Hi I have p0703 code in my 2010 Ford F-250 6.4l it says brake pressure switch b failure. I replaced the sensor but my cruse control and high idel still don't work. What can it be?
Submitted: 2 years ago.
Category: Ford
Expert:  James replied 2 years ago.
Hello and thanks for choosing just answer. On the bottom of the master cylinder there are two switches. One closer to the battery or one closer to the firewall. Which one did you replace?
Customer: replied 2 years ago.
I replaced the one closest to the battery
Expert:  James replied 2 years ago.
The sensor you want to replace is the one closer to the fire wall. This is the sensor you want to change out.