Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
Working on a 2001 Ford F150 4.2L Got codes P0340, P0443,
Customer: Hi I'm Manny, working on a 2001 Ford F150 4.2L Got codes P0340, P0443, P1451 P1409, p1127, P0135, P0141, P0155, P0161 … read more
EricFromCT
EricFromCT
Auto Technician
4,911 satisfied customers
ford ranger sport: my 2007 ford ranger is running rough. I
my 2007 ford ranger is running rough. I replaced all the wires and plugs a few minutes ago and it is still running rough. any ideas?… read more
Steve
Steve
Ford tech Specializing in electronics
Vocational, Technical or Trade School
6,755 satisfied customers
I have a high mileage 2000 Ford Ranger, 2.5 automatic. It cut
I have a high mileage 2000 Ford Ranger, 2.5 automatic. It cut off going down the road. I towed it home and performed the following. New plugs, wires, one coil, ECM, and another transmission: When in P… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
30,495 satisfied customers
ranger: 2.5 ford ranger... has spark and fuel pressure at the
2.5 ford ranger... has spark and fuel pressure at the rail 28 psi... has new timing belt put on by me in the summer... stuck finger in the timing belt cover belt is still intact and tight... there is … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
20,389 satisfied customers
Excursion: I have a 2000 Ford Excursion 6.8L, I dont know
I have a 2000 Ford Excursion 6.8L, I don't know if it is off on timing or if it has a bad coil on one of the plugs. Sitting at idle in park or neutral it will idle around 2k rpm's in drive or reverse … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
30,495 satisfied customers
Ford Ranger Super Cab 4x4: I have a early 2000 ford ranger
I have a early 2000 ford ranger has 3 codes p1409,p0176,p1451,and vehicle sputters out after 5 minutes can anyone point me in the right direction… read more
AutoGuy99
AutoGuy99
Automotive Technician
Vocational, Technical or Trade Scho
93 satisfied customers
1999 ford ranger: new sensor..nutral or park u..hooked..im pulling
i have a 1999 ford ranger with the 3.0 v6 i pulled a p0176 code that being the flex fuel sensor .. i got under the truck located it and i bought a flex fuel "smart" sensor wasnt going to spend 900 dol… read more
6Bucs
6Bucs
Senior Master Tech
Associate Degree
1,258 satisfied customers
1995 Ford f-350: powerstroke..loses power..we put a scanner..50 psi
I have a 1995 Ford f-350 powerstroke deisle, It loses power and cel comes on, its been doing this off and on, now steady loss of power we put a scanner on it and it comes up with nothing wrong cel is … read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
2001 ford ranger: runs great..egr insufficient flow..exhaust..driven
have changed out a motor in a ford ranger runs great cani,t get an inspection because the computer says egr insufficient flow have changed out all egr components have checked for vacuum leaks with sta… read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,480 satisfied customers
2001 ford ranger: runs fine..neutral (revs up and idles smooth)
2001 ford ranger 3.0, recently replaced heads due to blown head gasket (truck got hot) , now runs fine in park or neutral (revs up and idles smooth). drop into reverse or drive and the vehicle stumble… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,314 satisfied customers
1999 ford windstar: Lx..3.8l..idle when warmed up..tack
1999 ford windstar Lx 3.8l engine. rough idle when warmed up. and tack is not working. thanks Lorn… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
3,589 satisfied customers
1999 ford f 150: two wheel drive..have a few problems.have
hi a 1999 ford f 150 two wheel drive. with a 4.2 engine. have a few problems.have codes p0340/p0443/p1409/p0135/p0155/p1409/p1520/ so far we replace.cam sensor/one o2 sensor/defpt sensor/mass air flow… read more
Steve Jensen
Steve Jensen
Service Manger/ Lead Technician
High School or GED
422 satisfied customers
1997 ford ranger: getting spark..cylinder head..back together
i am not getting spark out of my 1997 ford ranger (2.3 4 cylinder) i replaced the cylinder head and put it back together and ran into this problem the truck ran before i began teardown. i cannot figur… read more
Arench
Arench
President
CT State GED w/ Honors
1,484 satisfied customers
1999 Ford ranger: Engine idles smoot..warm..scanned it with obd II
1999 Ford Ranger L4 2.5L. Engine idles smoot after warm up, but will not eccelerate without a terrible serging upand down. I have scanned it with OBD II but no codes are present. Please help.… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
30,495 satisfied customers
I have a 2000 Ford Ranger 3.0L Flex Fuel, manual ...
I have a 2000 Ford Ranger 3.0L Flex Fuel, manual transmission that has a PO306 cylinder 6 misfire code. The ignition coil, plugs, wires, and fuel injector have all been replaced. Fuel injector wire ha… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,684 satisfied customers
getting a p0305 dtc, which is #5 misfire...Spark plug has been changed
I am getting a p0305 dtc, which is #5 misfire. What could be the cause? Spark plug has been changed. Rough idle at start with warm engine, cold start engine is smooth… read more
Randall    (Cheeko)
Randall (Cheeko)
Ford Dealer
Vocational, Technical or Trade Scho
2,395 satisfied customers
1999 crown: solenoid..runs rough..acceleration is great, no hesitation
I have a 1999 crown vic, 4.6L, I had error code 1409, replaced EGR, EGR solenoid, replaced dpfe sensor, CEL still comes on, car runs great until thoroughly warmed up, then on idle runs rough especiall… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
30,495 satisfied customers
1999 Ford Ranger: 3.0 engine..check engine light has come..egr valve
I have a 1999 Ford Ranger, 3.0 engine. The check engine light has come on. The diagnostice computer at the Auto Store said it was the EGR valve. I have changed the EGR valve, and also put in new spark… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,684 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

30,495 satisfied customers

16 years experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,795 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

Tim Mohr

Tim Mohr

ASE MASTER TECH

3,758 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x