How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35624
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Ford F350 SuperDuty Pickup 4x4: no start condition code p2290/p2291

Resolved Question:

no start condition code p2290/p2291 removedhigh pressure pump dont know how to proseed
Submitted: 5 years ago.
Category: Ford
Expert:  Ron replied 5 years ago.
Hello and Welcome to Justanswer,

My name is XXXXX XXXXX I am here to try and assist your with your question.

What year is you F 350?
Customer: replied 5 years ago.
Customer: replied 5 years ago.
2003 i dont know how to test pump or stc tube
Expert:  Ron replied 5 years ago.
In most cases this code is set due to a failing high pressure oil pump , are you trying to install a new one? You need at least 500 PSI of oil pressure to fire your injectors. The best way to test the pump is to monitor you IPC (injector control pressure)signel while cranking. A normal reading is about 1200 PSI.
Customer: replied 5 years ago.
is this done on or off the truck how do i know if the pump is bad or stc losing pressure
Expert:  Ron replied 5 years ago.
The test is done on the truck, you monitor the IPC single while cranking.

I have enclosed the Factory Pinpoint test for both codes. This should help .

Click the links below and hit down load.

Start At AO9 on the first code.
Ron and 4 other Ford Specialists are ready to help you