How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sean Your Own Question
sean
sean, Ford Technician
Category: Ford
Satisfied Customers: 3105
Experience:  Certified Ford master technician since 2001
31670004
Type Your Ford Question Here...
sean is online now
A new question is answered every 9 seconds

TORQUE SETTINGS..A 1300 ROACAM MOTOR AS WELL AS CRANK ,CAM END FLOAT

Resolved Question:

I WOULD LIKE TO HAVE LIKE TO HAVE TORQUE SETTINGS ON A 1300 ROACAM MOTOR AS WELL AS CRANK ,CAM END FLOAT AND CONROD END FLOAT CAN ANY OF YOU ASSIST ME
Submitted: 5 years ago.
Category: Ford
Expert:  sean replied 5 years ago.

Hello, I hope the following is of assistance to you.

 

Camshaft

Descriptionmm
Valve lift cam (intake and exhaust)9.74
Camshaft bearing journal diameter23.96 - 23.98
Camshaft bearing journal bore diameter24.00 - 24.03
Camshaft end float0.075 - 0.185

 

Crankshaft

Descriptionmm
Crankshaft main bearing journal diameter (standard)56.980 - 57.00
Crankshaft main bearing journal diameter (undersize)56.726 - 56.746
Crankshaft main bearing journal shell width18.290 - 18.690
Crankshaft connecting rod journal diameter (standard)40.990 - 41.010
Crankshaft connecting rod journal diameter (undersize)40.740 - 40.760
Crankshaft connecting rod journal diameter (service 0.508)40.490 - 40.510
Crankshaft connecting rod journal diameter (service 0.762)40.240 - 40.260
Crankshaft end play0.075 - 0.285
Crankshaft thrust washer thickness (standard)2.800 - 2.850
Crankshaft thrust washer thickness (oversize)2.99 - 3.040

 

Connecting Rods

Descriptionmm
Connecting rod large end bore diameter43.99 - 44.01
Connecting rod small end bore diameter17.998 - 18.018
Connecting rod bearing shell, vertical inner diameter, standard41.016 - 41.050
Connecting rod bearing shell, vertical inner diameter, undersize 0.254 mm40.966 - 41.000
Connecting rod bearing shell, vertical inner diameter, undersize 0.508 mm40.516 - 40.550
Connecting rod bearing shell, vertical inner diameter, undersize 0.762 mm40.226 - 40.300
Connecting rod bearing shell, vertical inner diameter, undersize 1.016 mm40.016 - 40.050
Connecting rod bearing clearance (radial)0.006 - 0.026
Connecting rod bearing clearance (axial)0.100 - 0.250

 

Torque Specifications

DescriptionNmlb-ftlb-in
Oil gallery plug, 1/2"2216-
Crankshaft main bearing retaining bolts9570-
Crankshaft rear oil seal retainer retaining bolts10-89
Crankshaft position (CKP) sensor retaining bolt10-89
Crankshaft pulley retaining bolt12592-
Connecting rod retaining boltsa--
Hydraulic timing chain tensioner4030-
Timing chain tensioner arm retaining bolt2619-
Timing Chain guide retaining bolt2619-
Oil pump retaining bolts2015-
Oil pickup pipe retaining bolt10-89
Oil pan baffle retaining nuts1914-
Oil pan retaining boltsa--
Oil filter adaptor2015-
Oil pressure switch2015-
Oil drain plug2518-
Oil level indicator tube retaining bolts2015-
Accessory drive belt idler pulley retaining bolt4835-
Coolant pump retaining bolts10-89
Coolant pump pulley retaining bolts129-
Coolant expansion tank retaining bolt8-71
Power steering pump retaining bolts2518-
Power steering supply line retaining bracket retaining bolt2020-
Flywheel retaining bolts6749-
Air Conditioning (A/C) compressor retaining bolts2518-
Starter motor retaining bolts3526-
Battery tray support bracket retaining bolts2518-
Ground lead to side member retaining bolt1511-
Engine lifting eye2015-
Cylinder head boltsa--
Camshaft sprocket retaining bolt7555-
Camshaft bearing cap retaining bolts9-80
Camshaft position (CMP) sensor retaining bolt5-44
Valve cover retaining bolts9-80
Ignition coil retaining bolts6-53
Coolant flow control housing retaining bolts10-89
Spark plugs1511-
Intake manifold retaining nuts1813-
Intake manifold retaining bolts1813-
Exhaust manifold retaining nuts--
Exhaust manifold heat shield upper retaining bolts10-89
Exhaust manifold heat shield lower retaining bolts10-89
Engine front mount to engine front mount retaining bracket4835-
Engine front mount retaining bracket to cylinder head bolts2518-
Flexible exhaust pipe to exhaust manifold retaining nuts4735-
Engine rear mount center bolt9066-
Transaxle upper retaining bolt4432-
Transaxle lower retaining bolts4432-
Transaxle left-hand retaining bolt4432-
Transaxle right-hand retaining bolts4432-
Engine support insulator to crossmember retaining bolts4835-
Engine support insulator retaining bolt M107052-
Engine support insulator retaining bolt M1212089-
Engine support insulator to transaxle retaining bolts4835-
Strut and spring assembly top mount retaining nuts2518-

 

The cylinder head bolts are as follows,

  • Tighten the bolts in the sequence shown in four stages.
  • Stage 1: Tighten bolts 1 through 10 to 40 Nm.
  • Stage 2: Tighten the front two (M8) bolts to 15 Nm.
  • Stage 3: Tighten the front two (M8) bolts to 45 degrees.
  • Stage 4: Tighten bolts 1 through 10 to 120 degrees.

graphic

 

I hope this covers everything for you but if you need further assistance let me know and I'll reply to you as soon as I'm able to.

Best wishes,

Sean.

sean and 4 other Ford Specialists are ready to help you