How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE MasterTechnician
Category: Ford
Satisfied Customers: 12884
Experience:  35 years ASE Master Tech, Diagnostic , Electrical Specialist
13677702
Type Your Ford Question Here...
Randall C is online now
A new question is answered every 9 seconds

What are the torque specs for 6.0 FordF250 diesel 2005 model

Resolved Question:

what are the torque specs for 6.0 Ford
F250 diesel 2005 model
Submitted: 5 years ago.
Category: Ford
Expert:  Randall C replied 5 years ago.

Tracer :

Hello, My name isXXXXX will do my best to assist you. I am working with your question now. Will return shortly

Tracer :

what specs do you need or should I say for what items for torque?

Customer:

head bolts

Tracer :

thanks.getting info now. back shortly

Tracer :

it will be easier to send not in chat mode. I will get out of chat and send. back shortly

Randall C and 4 other Ford Specialists are ready to help you
Expert:  Randall C replied 5 years ago.


Cylinder Head

NOTE: Must use new cylinder head bolts.

Install the 10 inner cylinder head retaining bolts finger-tight.
Tighten the head bolts in the following sequence.
Tighten bolts 1 through 10 to 88 Nm (65 ft. lbs.).
Tighten bolts 1, 3, 5, 7 and 9 to 115 Nm (85 ft. lbs.).
Tighten bolts in sequence 1 through 10, clockwise 90 degrees.
Tighten bolts in sequence 1 through 10, a second time, clockwise 90 degrees.
Tighten bolts in sequence 1 through 10, a third time, clockwise 90 degrees.
Tighten bolts 11 through 15 to 24 Nm (18 ft. lbs.).
Tighten bolts 11 through 15 to 31 Nm (23 ft. lbs.).