How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48727
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

How is the best way to install CB radio in my 2011 Ford Ranger

Resolved Question:

How is the best way to install CB radio in my 2011 Ford Ranger
Submitted: 6 years ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 6 years ago.

Hello, I'm Chris.
I will do my best to answer your question fast and accurate using the info you have provided. Thanks for visiting Just Answer.


From the drivers floorboard you will see where wire harnesses go throug hthe firewall through rubber grommets. You can push a stiff wire through there and pull your wiring through next to it. You can also run the wireing under the door sill that you step on just prior to the floor carpet and there are rubber grommets there as well or you can drill a ew hole there and clear silicone it up to seal it.

Chris (aka- Moose) and 2 other Ford Specialists are ready to help you