How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Ford Tech -
Category: Ford
Satisfied Customers: 18786
Experience:  18+yrs experience. State Inspector & Ford Diagnostics/Repair
Type Your Ford Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Ford F250 super duty: diesel..I have removed the glove box..under hood

Resolved Question:

Where do I find the blower resistor on a Ford F250 super duty diesel? I have removed the glove box but can't find it. Also, can't find it under hood. Thanks
Submitted: 6 years ago.
Category: Ford
Expert:  Ron Z. replied 6 years ago.

Welcome to! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.


Give another look behind the glove box. More towards the passenger's side of the HVAC housing. It should be there.



  • Lower the glove compartment.
  • Detach the 2 heater core and evaporator core housing harness electrical connectors from the heater core and evaporator core housing.
  • Disconnect the blower motor resistor electrical connector.
  • Remove the 2 blower motor resistor screws.
  • Remove the blower motor resistor.
  • To install, reverse the removal procedure.
Ron Z. and 7 other Ford Specialists are ready to help you