How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott W. Your Own Question
Scott W.
Scott W., Ford Technician
Category: Ford
Satisfied Customers: 3321
Experience:  28 yrs. experience as Ford ASE Master Technician. Accolades include being a 2005 Ford PTS Regional Finalist and 2006 ASE Ford National Technician.
26022388
Type Your Ford Question Here...
Scott W. is online now
A new question is answered every 9 seconds

2000 ford escort: im changing rod bearings..2.0 engine..overhead cam

This answer was rated:

im changing rod bearings in a 2000 ford escort with a 2.0 engine with a single overhead cam. i need to know the rod bearing clearance.

Steve W :

Hello my name isXXXXX give me a few minutes to find your info, thanks.

Steve W :

This is a little more than you were asking for, but here is all the specs for clearance and torque.

Customer:

ok thank you.....would that happen to include the torque patterns for the oil pan as well?

Steve W :

Let me see if I can find that.

Customer:

i made a mistake, the car is a 2002. would that make a difference on the specs? it is a 2.0 engine

Steve W :

It might, I will give you a new set.

Customer:

im sorry about that

Steve W :

No problem

Customer:

does that cover oil pan as well??

Customer:

thank you sooo much!!!!

Steve W :

No problem, any thing else you need?

Customer:

i think that should do it...

Steve W :

Ok, you let me know, thanks for using Just Answer, Steve W

Scott W. and 6 other Ford Specialists are ready to help you