How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike S. Your Own Question
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 7500
Experience:  ASE Certified Master Technician
Type Your Ford Question Here...
Mike S. is online now
A new question is answered every 9 seconds

2000 ford ranger: the camshaft position sensor

Customer Question

what do I have to remove to get to the camshaft position sensor on a 2000 ford ranger with a 2.5
Submitted: 6 years ago.
Category: Ford
Expert:  Mike S. replied 6 years ago.

FlatHead_337 :

Please include the year,make,model,sub-model,engine,2wd,4wd,flex,gas,diesel. Please click accept when done, thank you and come back often. For those instructions, click here.

Customer: replied 6 years ago.


2000 ford ranger xlt 2.5 2wd gas

Expert:  Mike S. replied 6 years ago.
Have you located the sensor as of yet? Is there things in the way?
Customer: replied 6 years ago.

i think I found itit does not appear to have anything in the way. does the crankshaft sensor look like the camshaft sensor?


Expert:  Mike S. replied 6 years ago.

Crankshaft Position Sensor


Camshaft Position Sensor





Customer: replied 6 years ago.

I have replaced the cam sensor now the truck wont start


Expert:  Mike S. replied 6 years ago.
Why did you replace it it the first place? What there a code? Did it start before?