Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

high side open bank one what does this mean

Customer Question
high side open bank one what does this mean
Submitted: 11 years ago.Category: Ford
Ask Your Own Ford Question
Answered in 13 minutes by:
10/30/2010
Ford Mechanic: connor75, ASE Certified Technician replied 11 years ago
connor75
connor75, ASE Certified Technician
Category: Ford
Satisfied Customers: 360
Experience: Senior master technician, Ase master L1
Verified

connor75 :

I don't recognize the 1360, the 1293 basically means there is an open between the Idm and the injectors on the hot wire ( passengerside) the most likely cause of this is a melted under valve cover harness. The valve cover gasket contains an electrical connection to the injection and glow plug harness and it has a tendency to melt. Remove that valve cover and inspect the valve cover gasket and the under valve cover harness.

connor75
connor75, ASE Certified Technician
Category: Ford
Satisfied Customers: 360
Experience: Senior master technician, Ase master L1
Verified
connor75 and 87 other Ford Specialists are ready to help you
Ask your own question now
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a ford mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask connor75 Your Own Question
connor75
connor75
connor75, ASE Certified Technician
Category: Ford
Satisfied Customers: 360
360 Satisfied Customers
Experience: Senior master technician, Ase master L1

connor75 is online now

Related Ford Questions
I'm having problems with the sensors on the motor and wanted
I'm having problems with the sensors on the motor and wanted to know where abouts bank 1 sensor 2 is located on my 2011 ford focus SE car … read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
9,281 satisfied customers
We have a 96 f250 7.3 that is running real bad. it sounds
we have a 96 f250 7.3 that is running real bad. it sounds like it missing on 4 cyls. we unplugged the connectors on the passenger side and it didn't make any difference. we un plugged the front one on… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
36,247 satisfied customers
It has a fuel knock and no power. I put a computer on it the
I put a computer on it the those code came up p1293and p1294 … read more
Peter B.
Peter B.
master technition
Vocational, Technical or Trade School
2,346 satisfied customers
My truck acts like its misfiring ,but i don't have any data.
my truck acts like its misfiring ,but i don't have any data. i put code reader on it and short fuel trim bank 1 and 2 is 20-23%. WHat is going on here? my right exhaust manifold is cracked if that mea… read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
11,880 satisfied customers
have a 2002 ford f350 7.3 diesel put a icm on it, checked
have a 2002 ford f350 7.3 diesel put a icm on it, checked all wires, we have no power to the right side. truck will start but runs horrible. have codes p1670-ef feedback signal not detected and p0603 … read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
36,247 satisfied customers
i have a 2000 ford E350 7.3L diesel my snap-on scanner tell
i have a 2000 ford E350 7.3L diesel my snap-on scanner tell me code P1272, P1274, P1276, P1278, HIGH TO LOW SIDE OPEN AND P1294 HIGH SIDE OPEN BANK #2 LEFT WHAT ARE MY PROBLEM POSSIBLEITIES… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
36,247 satisfied customers
Intake manifold runner control problem- Error P2004
What does P2004 mean? Intake Manifold Runner Control, Bank 1 stuck open. Repair to clear code.… read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
2002 F 250: triton..v8..firing..the right bank left side cylinders are
my 2002 F 250 triton v8 is only firing on the right bank left side cylinders are not firing.80,000 miles on engine.… read more
Justin
Justin
Vocational, Technical or Trade Scho
141 satisfied customers
97 Ford expedition: 5.4 L Eng. when the scanner reads..o2 sensor
97 Ford Expidition 5.4 L Eng. when the scanner reads o 2 sensor bank one or o2 sensor bank 2,does it mean the sensor is actully bad or is it in relation to another problem.?… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
powerstroke..knock..throttle..scanner said 5 injectors miss fireing.
96 e450 with powerstroke one minute running great next minute skiping, fuel issue fuel knock runs hard start,ruff idle,lack of throttle responce. scanner said 5 injectors miss fireing. changed valve c… read more
HDGENE
HDGENE
11,086 satisfied customers
2002 ford F350: 4x4..mileage..check engine light..engine light came
Ihave a 2002 ford F350 4x4 powerstroke auto 140k mileage. WEnt out driveway and the truck started missing, check engine light came on, lost power. Checked wiring harness to glow plugs and injectors an… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
Rocker cover connector and fuel injector on bank 1..valve cover
EEC test found hard fault p1293 and continouse memory code p1316. pin point test found open between rocker cover connector and fuel injector on bank 1, removed valve cover to look for bad wire. did no… read more
Tim
Tim
Ford Senior Master Technician
Vocational, Technical or Trade Scho
1,044 satisfied customers
1996 Ford Windstar: 140,000 miles..check engine light..gears and rev
My 1996 Ford Windstar has 140,000 miles. The check engine light remained on, when I had it checked the code indicted the oxygen sensor in bank 1 and 2. I replaced those. When driving the overdrive use… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
36,247 satisfied customers
2000 7.3 powerstroke. Driving down the highway about 60 m.
2000 7.3 powerstroke. Driving down the highway about 60 m.p.h. the service engine soon light came on and I lost a lot of power and boost. Truck never stalled. Idles incredibly rough and has no power. … read more
lostrider
lostrider
lead technician/working shop foreman
Vocational, Technical or Trade Scho
3,074 satisfied customers
1999 Taurus se: engine codes..PO401 EGR insufficient flow..TCC
I have a 1999 Taurus se with 4 engine codes showing as follows.PO430 bank 2catalyst below limit,P1401 DPFE circuit high voltage,PO401 EGR insufficient flow detected andP1744 TCC system perform,perform… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
36,247 satisfied customers
1996 windstar: trouble code..Runner..heated o2 sensor too lean bank 1
I have a 1996 windstar, I have a trouble code that comes up p1538 Intake Manifold Runner control bank #2 stuck open. and also p171 heated o2 sensor too lean bank 1. What and where do i find the intake… read more
stefano
stefano
Auto Technician
Vocational, Technical or Trade Scho
236 satisfied customers
2002 F350 super duty: 7.3L deisel..high side..code p1316; idm codes
2002 F350 super duty, 7.3L deisel. pulled up a code P1294; high side open, bank 2, left, and code P1316; idm codes. what does all this mean?… read more
robert legowski
robert legowski
2,067 satisfied customers
1998 expedition: circuit malfunction..front of the catalytic converter
I have a 1998 expedition and I am getting a code P0155/02 sensor heater circuit malfunction bank 2 sensor 1. I have replaced the sensors, reset the code, but it still pops up. Is bank 2 in front of th… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

27,581 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Ford Technician

36,247 satisfied customers

24 years of experience diagnosing & repairing

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Mike V.

Mike V.

Auto Service Technician

3,021 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,558 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

Cam

Cam

Journeyman Automotive Technician

12 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x