How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny Z. Your Own Question
Kenny Z.
Kenny Z., Ford Senior Master Tech
Category: Ford
Satisfied Customers: 5505
Experience:  Auto Trans, Drivability and Electrical Specialist
Type Your Ford Question Here...
Kenny Z. is online now
A new question is answered every 9 seconds

on a 2002 ford windstar 3.8 how much transmission fluid is

This answer was rated:

on a 2002 ford windstar 3.8 how much transmission fluid is needed when replacing the filter and pan fluid ?

Hi Customer. Thank you for asking your question on JustAnswer.


It varies depending on how long the pan is off for. I add 4 quarts and start it up and let it idle a good 10 minutes then check it. They usually take 5-6 quarts total. Add fluid a pint at a time after the initial 4 quarts after it warms up ( about 10 minutes).

Kenny Z. and 3 other Ford Specialists are ready to help you