How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom P. Your Own Question
Tom P.
Tom P., Ford Master Technician
Category: Ford
Satisfied Customers: 73
Experience:  20+ years as a Ford Tech, ASE Master, Ford Master, Advance Engine Performance, Technical Instructor
Type Your Ford Question Here...
Tom P. is online now
A new question is answered every 9 seconds

97 f150 blend door removal help

Customer Question

97 f150 blend door removal help
Submitted: 6 years ago via Mitchell1DIY.
Category: Ford
Expert:  Tom P. replied 6 years ago.
Hi, I'm Tom and I will try to help you. Before you remove the dash I would remove the blend door motor and see if the door moves. The blend door motor is located under the center of the lower part of the dash. Remove the motor, turn the shaft and see if your heat changes. The actuator is a small rectangular box held to the case with four screws. Let me know if this helps or if you need additional information.
Expert:  Tom P. replied 6 years ago.

Hi Click Here for step by step instructions on blend door motor removal.

Hope this helps.

Customer: replied 6 years ago.
on this eary 97 f150 xlt 4wd model you can't slide rod out had to cut small hole behind glove box, access throught heater box. My 8yr ASE Brain came back alive.. ty
Expert:  Tom P. replied 6 years ago.
Glad to hear you worked it out. Take care.