How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE MasterTechnician
Category: Ford
Satisfied Customers: 12803
Experience:  35 years ASE Master Tech, Diagnostic , Electrical Specialist
13677702
Type Your Ford Question Here...
Randall C is online now
A new question is answered every 9 seconds

how do you remove the headlight assembly on a 07 ford fusi

This answer was rated:

how do you remove the headlight assembly on a 07 ford fusion
Hello, you will have to remove front bumper cover. looking for that info now and will send next

HEADLAMP ASSEMBLY



Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

  1. Remove the front bumper cover.
  2. Remove the headlamp assembly pin-type retainer.
  3. Remove the 4 bolts and the headlamp assembly.
    • Disconnect the electrical connectors.
  1. To install, reverse the removal procedure.
COVER - FRONT

Ford Fusion


Mercury Milan


MKZ


Exploded View

All vehicles
  1. With the vehicle in NEUTRAL, position it on a hoist.
  2. Remove the 6 pin-type retainers (3 each side).
  3. Remove the 8 fender splash shield screws (4 each side).



  1. Remove the 4 air deflector bolts.

MKZ only



  1. Remove the 5 bolts from the top of the radiator grille.

Fusion and Milan only



  1. Remove the 2 bolts and the 2 pin-type retainers from the top of the radiator grille.

All vehicles

  1. If equipped, disconnect the fog lamp electrical connectors.
  2. Remove the front bumper cover.
  3. To install, reverse the removal procedure.

 

Randall C and 2 other Ford Specialists are ready to help you