How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim West Your Own Question
Tim West
Tim West, ASE Certified Technician
Category: Ford
Satisfied Customers: 4638
Experience:  ASE Certified Service manager of Firestone
Type Your Ford Question Here...
Tim West is online now
A new question is answered every 9 seconds

abs light stays on. 2000 ford mustang gt. diagnosed as faulty

Resolved Question:

abs light stays on. 2000 ford mustang gt. diagnosed as faulty module by computer. costs $1000. could it be a lot cheaper relay or dirt on the sensors ?
Submitted: 7 years ago.
Category: Ford
Expert:  Tim West replied 7 years ago.
Chat Conversation Started
Tim West : Thanks for visiting Just Answer
Tim West : You need to be able to communicate with the brake module in order to scan for any codes.
Tim West : These codes will tell you if it detects a problem with a speed signal etc...
Tim West : Do you know what codes were stored in the ABS module?
Tim West : Also, if a scan tool does not communicate with the module, it's likely faulty.
Tim West : The brake control modules are common failures
JACUSTOMER-ev07bmjw- :

you didnt answer my question about the relay or sensors

Tim West : Would you like to test the sensors?
Tim West : It's possible it could be a sensor.
Tim West : You will need to test it or communicate with the ABS module to tell if it's bad.
Tim West and 6 other Ford Specialists are ready to help you
Expert:  Tim West replied 7 years ago.
Things to check