How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35601
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

2001 Ford Focus: vacuum leak..EGR valve, EGR flow path clear..solenoid

Resolved Question:

2001 Ford Focus, ZTS (16V) automatic...Error code P0401. Verified no vacuum leak, good engine vacuum, replaced EGR valve, EGR flow path clear, replaced EGR solenoid. What's next? Could it be a signal problem between the PCM and EGR solenoid? How is that tested?
Submitted: 7 years ago.
Category: Ford
Expert:  Ron replied 7 years ago.
Hello and Welcome to Justanswer,


My name is XXXXX XXXXX I am here to try and assist your with your question.

In 99% of all cases the code P0401 is set due to a faulty DPFE (EGR pressure sensor) and in most cases, replacing it will resolve this code. You can find it next to the Brake master cylinder.

graphic
Customer: replied 7 years ago.
Is there a test or process to verify that it is the EGR pressure sensor?
Expert:  Ron replied 7 years ago.
Yes there is, Ford TSB 04-11-01 was released for a streamlined diagnostic procedure and replacement of the sensor. Download TSB here
Ron and 6 other Ford Specialists are ready to help you