Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
ford contour 2.0: Ron , I was changing timing belt tensioner
Ron , I was changing timing belt tensioner on a 1997 ford contour 2.0 the camshaft moved. how do I make sure the camshafts are aligned before I proceed… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
how to time 1995 ford contour 2.0L engine after replacing head gasket
how to time 1995 ford contour 2.0L engine after replacing head gasket if i did not mark camshaft position before removing… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
I just replaced the timing belt and tensioner on a 1999 ford
I just replaced the timing belt and tensioner on a 1999 ford contour With a 2.0 in it. My problem is the belt keeps walking towards the end of The gears and rubs the timing cover.... Any suggestions??… read more
Steve
Steve
Ford tech Specializing in electronics
Vocational, Technical or Trade School
6,741 satisfied customers
I have 2000 Ford Contour 2.0 4Cyl and I need a timing belt,
I have 2000 Ford Contour 2.0 4Cyl and I need a timing belt, is there a special one that I need or can I purchase any kind?… read more
Dr. Hamman
Dr. Hamman
Vocational, Technical or Trade Scho
6,089 satisfied customers
Ford Escort LX: I have a 1997 ford escort w/2.0 liter engine.
I have a 1997 ford escort w/2.0 liter engine. It ran well until one morning, it started, ran ,and was turned off. A few minutes later it would not start. The battery is good, I went into the trunk and… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
The locating to insert the timing pin to keep engine from moving, i
where is the locating to insert the timing pin to keep engine from moving, i am trying to set the timing… read more
Scott W.
Scott W.
Diesel, Automatic trans, full line tech
Associate Degree
3,658 satisfied customers
1996 ford probe: timing belt..replacing..crankshaft pulley..a notch
hello have a 1996 ford probe 2.0 liter 5 speed and doing a timing belt change need to know all the details to replacing one i took off the top timing chain cover but before i took off the bottom timin… read more
Kevin Bourcier
Kevin Bourcier
Vocational, Technical or Trade Scho
385 satisfied customers
1998 ford contour: radio, everything electric still works..starter
1998 ford contour stopped dead all lights, radio, everything electric still works. try to start it and all i get is a whooshing sound from the starter can you please help me?… read more
Al Smitty
Al Smitty
Associate Degree
660 satisfied customers
2002 FORD WINDSTAR: NOISE COMING../OR BEARING..STALLS..FORD DEALER
MY 2002 FORD WINDSTAR HAS THE FOLLOWING SYMPTOMS/PROBLEM: HAS A CHIRPING NOISE COMING FROM THE BELT AREA AND SOMETIMES IT STALLS. I CAN RESTART IT AGAIN AND IT RUNS AGAIN. WENT TO TIREKINGDOM WICH REP… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
99 ford contour: installed new..new timing belt..wont stay..with a 2.0
installed new timing belt and tensioneers belt is riding off the pullys and wont stay on is there an answer for this it is a 99 ford contour with a 2.0… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
16,172 satisfied customers
1998 Ford Contour: the timing belt..camshaft..alignment..tool
I am replacing the timing belt on my 1998 Ford Contour 2.0 DOHC. It's has the VCT engine. I have all the tools to do the job correctly (Ford timing pin and the camshaft alignment tool). I have meticul… read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
99 contour: cyl..timing belt..slipping..its because of the crankshaft
Ok I have a '99 contour with the small 4 cyl dohc engine....the timing belt has broken twice so far this year and the second one is already(in just two weeks) rubbing and slipping away from the motor.… read more
Steve Jensen
Steve Jensen
Service Manger/ Lead Technician
High School or GED
422 satisfied customers
1996 ford probe: waterpump..advise or maybe a diagram of the process
I am trying to replace a waterpump on my 1996 ford probe I would like some advise or maybe a diagram of the process.… read more
Kartmn
Kartmn
Vocational, Technical or Trade Scho
22 satisfied customers
1999 Ford Contour: timing belt..crankshaft..camshaft..intake cam
1999 Ford Contour 4 cylinger, 2.0 liter. Replaced timing belt rotated 2 turns at crankshaft. When rechecking camshaft alignment the intake cam is good. The exhaust cam does NOT align. Engine has varia… read more
Kenny Z.
Kenny Z.
Ford Senior Master Technician
High School or GED
6,056 satisfied customers
98 escort: I need to change the timing belt on a 1.7 four banger
I need to change the timing belt on a 1.7 four banger in my 98 escort. I've been a shade tree for years. I can't seem to get the cover off to do the job. I got the alt. off and working on the unit fra… read more
Mark W
Mark W
Associate Degree
92 satisfied customers
ford contour: timing belt..manual says to line notch on crankshaft
i have a broken timing belt on a ford contour 2.0 . the manual says to line notch on crankshaft pully up with mark on engine. my problem is there is no mark on pully… read more
Ssholar
Ssholar
Team Leader Shop Foreman
High School or GED
6 satisfied customers
Contour: the way you time a 2.0 is to take valve cover off..cams
HiCustomer the way you time a 2.0 is to take valve cover off. In the back of the cams you have slots on both cams. Put a flat bar into the slots. It will only fit one way into both cams so if it won't… read more
drobbi
drobbi
Vocational, Technical or Trade Scho
76 satisfied customers
1997 ford contour: cam gears and crank..diagram..cam sensor removed
Where are the timing marks on the cam gears and crank on a 1997 ford contour and how are they alighned. maybe a diagram? Also how is the cam sensor removed?… read more
Glenn
Glenn
Senior Master Ford Technician
Associate Degree
1,746 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x