How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 36077
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

How to replace 2000 ford mustang ecu ?

Resolved Question:

how to replace 2000 ford mustang ecu ?
Submitted: 7 years ago.
Category: Ford
Expert:  Ron replied 7 years ago.

HiCustomer

 

Thank you for asking your question on JustAnswer.

 

When replacing the PCM (ECU) you will have to have the new one programmed for your car. The dealer can do this for you for about 1 hour of labor. The PCM is located in the passenger side kick panel just under the glove box.

 

Enclosed are removal instruction.

 

graphicgraphicgraphic

 

 

 

Customer: replied 7 years ago.
I ordered one from a refurb shop and gave them my vin number, so when I recieve the ECU module, I shoudn't have to program anything , correct ?


Thanks
Expert:  Ron replied 7 years ago.

HiCustomer

 

Thank you for asking your question on JustAnswer.

 

Besure they have programmed it and yes you should be fine.

 

Ron and other Ford Specialists are ready to help you