How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony, Ford Technician
Category: Ford
Satisfied Customers: 11808
Experience:  ASE Master Automobile Technician with over 20 years exp.
Type Your Ford Question Here...
Anthony is online now
A new question is answered every 9 seconds

brake lights and turn signals do not work on 97 crown victoria.

Resolved Question:

brake lights and turn signals do not work on 97 crown victoria. Fuses are good, bulbs are good. 3rd brake light works. lights turn on. Also the hazards don't work.
Submitted: 7 years ago.
Category: Ford
Expert:  Anthony replied 7 years ago.

Hello! Welcome to justanswer!


That usually means that the multifunction switch on the steering comumn is bad. You should replace it to get things working again.

Customer: replied 7 years ago.
is that what i should ask for at the parts store? And is it difficult to do.
Expert:  Anthony replied 7 years ago.
Its easy. Just remove the big cover on the steering column by taking out the screws in the holes underneath it. The part is called the multifunction switch.
Anthony and 4 other Ford Specialists are ready to help you