How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim West Your Own Question
Tim West
Tim West, ASE Certified Technician
Category: Ford
Satisfied Customers: 4638
Experience:  ASE Certified Service manager of Firestone
Type Your Ford Question Here...
Tim West is online now
A new question is answered every 9 seconds

Our 2008 Ford Escape XLT has the same problem with the blower

Customer Question

Our 2008 Ford Escape XLT has the same problem with the blower fan not working on the first three settings. It only works on high. All of the associated fuses appear to be OK.
Submitted: 7 years ago.
Category: Ford
Expert:  Tim West replied 7 years ago.
Thanks for visiting
This happens when the blower motor resistor fails. 1. Lower the glove compartment.
2. Disconnect the blower motor resistor electrical connector.
3. Remove the 2 blower motor resistor screws.

o To install, tighten to 3 Nm (27 lb-in) .

4. Remove the blower motor resistor.
5. To install, reverse the removal procedure.graphic