How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dieseljunky2 Your Own Question
Dieseljunky2, Ford Mechanic
Category: Ford
Satisfied Customers: 3946
Experience:  ASE Certified, Ford Certified, Cummins Certified, & 20+ years in field experience
Type Your Ford Question Here...
Dieseljunky2 is online now
A new question is answered every 9 seconds

Ford f150: c1095, c1096 pump motor cicuit open, pump motor failure

Resolved Question:

ford f150 error c1095, c1096 pump motor cicuit open, pump motor failure- ABS
where to look to start
Submitted: 7 years ago.
Category: Ford
Expert:  Dieseljunky2 replied 7 years ago.
First look at the abs module under the hood. There will be a two wire connector coming from a black round motor on the side of the module. Make sure this two wire connector is plugged in. If it is plugged in and the wires look ok, continue.The next most likely caused by a bad abs module. It also cannot be just plugged in to replace. It must be programmed with a scan tool capable of module programming. There are very few places other than the dealer that have this type of tool. All in all, you are probably better off just having the dealer fix it. The old module needs to be on the truck so that the calibrations can be retrieved from it before the new one is put on, so you can't put a new one on then take it to get it programmed.
Dieseljunky2 and 3 other Ford Specialists are ready to help you