How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35603
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

How do I set the timing on my 1996 Ford F250 5.8L pick up

Resolved Question:

How do I set the timing on my 1996 Ford F250 5.8L pick up? I do not know where to find the chip to disengage the computer. Can you help?
Submitted: 8 years ago.
Category: Ford
Expert:  Ron replied 8 years ago.



Thank you for asking your question on JustAnswer.


The connector you are looking for the SPOUT connector. The connector is the 2 wire connector located on the drivers inner fender. Timing is set at 10 degrees BTDC with the connector removed..




Ron and 5 other Ford Specialists are ready to help you