How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lostrider Your Own Question
lostrider
lostrider, Ford Technician
Category: Ford
Satisfied Customers: 3075
Experience:  ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.
9493671
Type Your Ford Question Here...
lostrider is online now
A new question is answered every 9 seconds

How do u change the fuel filter on a 2000 v6 mustang?

Customer Question

how do u change the fuel filter on a 2000 v6 mustang?
Submitted: 8 years ago.
Category: Ford
Expert:  lostrider replied 8 years ago.

Hi maxlax this is lostrider, here is the procedure, there are special tools involved that can be purchased at most major parts stores, hope this helps,

Fittings-Push Connect


Special Tool(s)
graphicFuel Line Disconnect Set
310-S039 (T90T-9550-S)

 

Notes

REMOVAL

WARNING: FUEL SUPPLY LINES ON ALL VEHICLES EQUIPPED WITH FUEL INJECTED ENGINES WILL REMAIN PRESSURIZED FOR LONG PERIODS OF TIME AFTER ENGINE SHUTDOWN. FUEL SYSTEM PRESSURE MUST BE RELIEVED PRIOR TO FUEL SYSTEM SERVICE TO PREVENT POSSIBLE PERSONAL INJURY OR A FIRE HAZARD.

  1. Disconnect the battery. For additional information, refer to Battery.
  2. Relieve the fuel system pressure.
  3. Raise the vehicle for access to the filter.
  4. Disconnect the filter push connect fittings.

graphic

  1. Unsnap the filter from the bracket and remove.

INSTALLATION

  1. To install, reverse the removal procedure.

graphic

 

Click ACCEPT for the Answer and please leave a FEEDBACK!!!, Thank you.