How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask EMRSR Your Own Question
EMRSR
EMRSR, Master Certified Service Manager
Category: Ford
Satisfied Customers: 3010
Experience:  20 years with Ford, Master Certified
18136160
Type Your Ford Question Here...
EMRSR is online now
A new question is answered every 9 seconds

My arm rest is loose on the drivers side door of E150 van..tighten

Customer Question

My arm rest is loose on the drivers side door of E150 van how do i tighten it up!
Submitted: 8 years ago.
Category: Ford
Expert:  EMRSR replied 8 years ago.

Wha t year is the van?

 

Customer: replied 8 years ago.
1997
Expert:  EMRSR replied 8 years ago.

This is a pic of your door trim, does yours look similar?

 

Section 501-05: Trim and Ornamentation - Interior1997 E-Series Workshop Manual
REMOVAL AND INSTALLATION


 

Trim Panel - Front Door

Removal

  1. Open the front door.
  1. Remove the door handle bezel.
  1. Remove the power window/door lock switch bezel, if so equipped.
  1. Remove the rearview mirror fastener trim cover.
  1. Remove the four door trim panel retaining screws.
  1. Lift the door trim panel from the door to disengage the trim panel clips and remove.
  1. Remove the courtesy lamp wiring harness connector.

Installation

  1. Follow the removal procedure in reverse order
Customer: replied 8 years ago.
I can not see the pictures but i think door handel bezel is what is loose, you grab hold of it to shut the door
Expert:  EMRSR replied 8 years ago.

From what I see it appears you will have to remove the door trim panel and make your adjustments from the back side of the panel.

 

Section 501-05: Trim and Ornamentation - Interior1997 E-Series Workshop Manual
REMOVAL AND INSTALLATION


 

Trim Panel - Front Door

Removal

  1. Open the front door.
  1. Remove the door handle bezel.
  1. Remove the power window/door lock switch bezel, if so equipped.
  1. Remove the rearview mirror fastener trim cover.
  1. Remove the four door trim panel retaining screws.
  1. Lift the door trim panel from the door to disengage the trim panel clips and remove.
  1. Remove the courtesy lamp wiring harness connector.

Installation

  1. Follow the removal procedure in reverse order.
Customer: replied 8 years ago.
I have rearview mirrow switch on with powerwindows switch where are the 4 screws I have to remove! I have a conversion van! I removed bothh bezels cant get to screw!
Expert:  EMRSR replied 8 years ago.
Can you upload a picture of the Conversion Van door trm?
Customer: replied 8 years ago.
Expert:  EMRSR replied 8 years ago.
I can't see it.
Customer: replied 8 years ago.
You ask me to send you a picture of the door trim did you get it.
Customer: replied 8 years ago.
Expert:  EMRSR replied 8 years ago.
It will not show.