How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony
Anthony, Ford Technician
Category: Ford
Satisfied Customers: 11808
Experience:  ASE Master Automobile Technician with over 20 years exp.
15218643
Type Your Ford Question Here...
Anthony is online now
A new question is answered every 9 seconds

CAM POSITION SENSOR FORD F-150 99 4.2L WHERE IS IT

This answer was rated:

CAM POSITION SENSOR FORD F-150 '99 4.2L? WHERE IS IT?

Hi and welcome to Just Answer!

 

Here are the steps and pics:

 

  1. Partially drain the cooling system; refer to Section 303-03A .
  1. Remove the air cleaner; refer to Section 303-12 .
  1. Disconnect the heater water outlet tube.
    1. Disconnect the fuel charging wiring harness from the heater water outlet tube.
    1. Remove the heater water outlet tube bolt.
    1. Position the heater water outlet tube aside.
    graphic
    Disconnect the CMP sensor electrical connector
    graphic
    1. Remove the bolts.
    1. Remove the camshaft position sensor from the camshaft synchronizer (12A3
  1. Remove the camshaft position sensor (6B288)
    graphic
Anthony and 4 other Ford Specialists are ready to help you
graphic