How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Mc Your Own Question
John Mc
John Mc, Ford Technician
Category: Ford
Satisfied Customers: 6240
Experience:  19 years Ford Lincoln Mercury experience
Type Your Ford Question Here...
John Mc is online now
A new question is answered every 9 seconds

2003 Ford explorer: po 775 Pressure Control Solenoid B What is it

Customer Question

2003 Ford Exployer   4.0    I'm getting an PO 775 Pressure Control Solenoid B    What is it ? How do I fix it? Bob
Submitted: 8 years ago.
Category: Ford
Expert:  John Mc replied 8 years ago.

Hello, I am John, a Ford dealer technician.

I hope I can help solve your problem quickly and accruately.


This code is caused by a bad solonoid pack in the transmission. It is a very common problem. To replace it you need to remove the pan and replace the solonoid pack that is on the front drivers side inside the trans. The solonoid pack is only available at dealers and cost around $450


I hope this answer has been helpful to you! If you have any further questions please feel free to ask.

If this answer has been helpful please accept so I can recieve payment.

Thank you,


JustAnswer Expert