How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lostrider Your Own Question
lostrider, Ford Technician
Category: Ford
Satisfied Customers: 3075
Experience:  ASE Master Technician, Ford Senior Master Technician,Diesel certified, ASE Master, 22 yrs FORD exp.
Type Your Ford Question Here...
lostrider is online now
A new question is answered every 9 seconds

2006 Ford: you change the Temperature control sensor..located under

Resolved Question:

how do you change the Temperature control sensor on a 2006 Ford Fusion? I was told by the dealer who diagnosed that the part was located under the dash.
Submitted: 9 years ago.
Category: Ford
Expert:  lostrider replied 9 years ago.

HiCustomerthis is lostrider


~ What kind of problem are you having with the car?


~Did they give you a part number for the failed part?

Customer: replied 9 years ago.

1. the ac will work for a few minutes then won't blow cold air anymore, just blows air.

2. the part number is XXXXX 6E5Z-19C734-AA Sensor

Expert:  lostrider replied 9 years ago.
here is the directions from the ford service manual, hope this helps.
SECTION 412-01: Climate Control2006 Fusion/Milan/Zephyr Workshop Manual

In-Vehicle Temperature Sensor

ItemPart NumberDescription
1 - In-vehicle temperature sensor electrical connector (part of 14401)
2 19C734 In-vehicle temperature sensor

Removal and Installation

  1. Remove the lower steering column shroud screws.
  1. Remove the lower steering column shroud.
  1. Disconnect the in-vehicle temperature sensor electrical connector.
  1. Remove the in-vehicle temperature sensor.
  1. To install, reverse the removal procedure.


lostrider and 3 other Ford Specialists are ready to help you