How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Glenn Your Own Question
Glenn, Senior Master Ford Tech
Category: Ford
Satisfied Customers: 1746
Experience:  26 years exp with Ford Products, ASE Master Auto & Truck + advanced engine perf L1/L2 Gas & Diesel
Type Your Ford Question Here...
Glenn is online now
A new question is answered every 9 seconds

Install a front license plate holder on a 2001 ford escape?

Resolved Question:

how do you install a front license plate holder on a 2001 ford escape?
Submitted: 9 years ago.
Category: Ford
Expert:  Glenn replied 9 years ago.

hello there,

They are held on by plastic 1/4 inch rivets. These rivets require a special rivet gun. You could substitute aluminum rivets but still need a gun large enough to handle 1/4". A nice Ford dealer may reattach it for nothing on the service drive. If it never had a front license plate bracket, holes will have to be drilled in the bumper cover. Bolts would be nearly impossible to use.

Glenn and 9 other Ford Specialists are ready to help you

Related Ford Questions