How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 35501
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Change the rear ABS sensor on my 2002 Ford Explorer 4-door V6?

Customer Question

How do I change the rear ABS sensor on my 2002 Ford Explorer 4-door V6?
Submitted: 9 years ago.
Category: Ford
Expert:  Ron replied 9 years ago.


 Thank you for asking your question on Just Answer.

The rear wheel sensor is mounted on top of the rear Diff and is held on with a 13mm bolt and a 2 wire connector. Remove the hold down bolt and turn and twist as you pull up and it comes right out. See picture for location.