Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
It was running very rough after warming up. sometimes it
it was running very rough after warming up. sometimes it would die. got codes. changed the fuel pump and filter, mass air flow, and some other sensors. got it started and moved to the shop. shut it of… read more
Julio Quispe
Julio Quispe
175 satisfied customers
I have a 1994 ford ranger 4.0 4x4 - As soon as I start the
I have a 1994 ford ranger 4.0 4x4 - As soon as I start the truck I get an check engine light. So took to auto shop and had codes read. here were the codes: 341- 157 -158 - 175 - 176 - 181- 189- 536. T… read more
Marty
Marty
Vice President / Manager
Associate Degree
34,212 satisfied customers
4x4 will not engage, light blink 6 times. Its the 4Hi and
its the 4Hi and 4low light it blinks than turns off … read more
Michael
Michael
701 satisfied customers
2003 Ford ranger: 4.0 L V6..Auto Zone..o2 sensors..runs rough
2003 Ford ranger, 4.0 L V6. P2195 code, Bank 1S1 and Bank 2S1. The guy at Auto Zone said these are the front 2 O2 sensors. Replaced, still runs rough, no improvement and check engin light is still on.… read more
Thomas
Thomas
Mechanic
High School or GED
1,537 satisfied customers
2007 Ford: 50k miles..Got a check engine light two days ago...cleaner
I have a 2007 Ford 500 with about 50K miles. Got a check engine light two days ago. Cleaned the Mass airflow sensor with mass airflow sensor cleaner yesterday. This morning spouse started car and got … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,904 satisfied customers
2003 ford ranger: check engine light came on..stalls..rev
I have a 2003 ford ranger, took it to auto zone because check engine light came on. cameup with codes saying mass air flow sensor or o2 sensors, replaced maf and 2 forward o2 sensors ,truck still idle… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,759 satisfied customers
98 ford: too lean bank 2....could it be bad mass air flow meter
i had a friend scan my 98 ford ranger...reads too lean bank 2....could it be bad mass air flow meter?… read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
1,535 satisfied customers
2003 ford ranger: sohc..trouble codes..po 174 , po 300 ,1 ,2 , 3, po
2003 ford ranger 4.0 sohc trouble codes po172 , po 174 , po 300 ,1 ,2 , 3, po.316 replaced crank senor , coil pack wires plugs ck fuel press ok , & cleaned mass air flow sensor… read more
Don Knight
Don Knight
Shop Manager/Technican
Associate Degree
1,695 satisfied customers
2002 Ford Ranger: cyl..check engine light..lean..neutral)
My 2002 Ford Ranger 6 cyl 4.0L has developed a rough idle (below 1000 rpm), and a check engine light, which my scanner id's as "running lean". If I'm stopped at a red light, with the transmission (aut… read more
EMRSR
EMRSR
High School or GED
3,002 satisfied customers
Ford Ranger: check engine lite..02 sensors..emission..same problem
I have a 98 Mazda B 3000 (Ford Ranger) and I have had it to the dealer a number of times to repair a check engine lite. 02 sensors and other emission sensors have been replaced and always seems to not… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
1994 Ford Ranger: Truck snatches and the check engine light goes out
1994 Ford Ranger 4.0 with the check engine light on. Truck snatches and the check engine light goes out. Also, battery light is on, but charging system is checking out fine. Just replaced the lower in… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2005 Ranger: 4X4..auto trans../> Have a check engine light..Hesitation
2005 Ranger 4.0 4X4 auto trans 37K miles. Have a check engine light on. Engine has a little Hesitation on excel. Took it to auto zone and had them pull the codes and they told me it showed a lean faul… read more
Eric
Eric
Retired
N/A
37,676 satisfied customers
1998 Ford Ranger: automatic transmission..blink..10 miles..light goes
I have a 1998 Ford Ranger with automatic transmission... the OD light will begin to blink on and off after about 10 miles of driving, then the transmission will shift hard. When I shut off the engine,… read more
Tim
Tim
Associate Degree
3,579 satisfied customers
2000 ford focus zx3: the rpm gauge jumps..rpms..check engine light
my 2000 ford focus zx3 shakes and hesitates, and the rpm gauge jumps and the car sounds like it is going to back fire, but it only happens when my rpms are over 2500. if i keep it below that it seems … read more
Don
Don
Shop Forman, lead tech
Vocational, Technical or Trade Scho
986 satisfied customers
1997 ranger: engine codes po171 & po174..manual trans..Auto Parts
i am receiving engine codes po171 & po174 on my 1997 ranger 4.0 engine with manual trans. i replaced both left & right 02 sensors about 18 months ago. however i repaced the units about 6 months apart … read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
1,535 satisfied customers
94 Ranger: a 4.0 L chugs and lurches..choke..engines..occurs
My son''s 94 Ranger with a 4.0 L chugs and lurches while driving. Similar to stepping on the gas with the choke on with the old engines. There is no particular scenerios that this occurs in. It has fu… read more
Vincent
Vincent
Automotive Technician
High School or GED
808 satisfied customers
2001 Ford Ranger: 4.0L..check engine..P0171-too lean (Bank 1),P0174
I have a 2001 Ford Ranger (4.0L) with " check engine " light on, read codes,came up with 3 different numbers ; P0171-too lean (Bank 1),P0174-too lean (Bank 2),and P0300-multiple misfire detected. Coul… read more
Tony Noble
Tony Noble
Service Manager
Associate Degree
148 satisfied customers
99 explorer: 4.0 automatic..check engine light..auto zone..egr valve
i have a 99 explorer with 4.0 automatic and the check engine light is on ad i had auto zone pull the codes and it was p0401 egr insufficent flow they said i needed and egr valve but i heard that will … read more
Ford Expert
Ford Expert
Service Technician
Vocational, Technical or Trade Scho
599 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

41,759 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x