How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 36027
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

1997 Ford Ranger: I remove the crankshaft pulley..2.3L

Resolved Question:

How do I remove the crankshaft pulley on a 1997 Ford Ranger with a 2.3L engine?
Submitted: 9 years ago.
Category: Ford
Expert:  Ron replied 9 years ago.

Hello Dave,

Once graphicyou have the centre bolt out it requires a special puller. Auto zone sells it for 15.00

Customer: replied 9 years ago.
How do you attach the puller. There are no holes in the pulley except for the center bolt.
Expert:  Ron replied 9 years ago.
If it is the type with no holes then a puller is not required. Take a small ball ping hammer and tap on both side and it should come right off.
Ron and 3 other Ford Specialists are ready to help you