How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Auto Mechanic
Category: Ford
Satisfied Customers: 2948
Experience:  Mechanic with over 30 years experience with N.Y.P.D. fleet service division
1699649
Type Your Ford Question Here...
Jerry is online now
A new question is answered every 9 seconds

I have a OBD code PO125 Clsd Loop Fuel Ctrl insufficient Coolant temp

This answer was rated:

I have a OBD code PO125 Clsd Loop Fuel Ctrl insufficient Coolant temp. What do I need to look at for a fix.
HelloCustomer That indicates the coolant isn't reaching operating temperature.First make sure the coolant level is correct, if low fill the system, clear the code and recheck . If it's full I would replace the thermostat.That is the most common cause of that code.Jerry
Jerry and other Ford Specialists are ready to help you
Thank you for using Just Answer and the bonus,Jerry.
Customer: replied 9 years ago.
The fluid was full, but was rusty so I am going to change it today, and try that before replacing the thermostat
I would replace the thermostat when changing the anti freeze.Jerry
Customer: replied 9 years ago.
Reply to Jerry's Post: Thankyou Jerry I will do that.