How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lurch Your Own Question
Lurch, Ford Cert.
Category: Ford
Satisfied Customers: 20903
Experience:  Ford Cert., Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Ford Question Here...
Lurch is online now
A new question is answered every 9 seconds

May need schematic.

This answer was rated:

May need schematic.
Which engine does your Explorer have?
Customer: replied 10 years ago.
Reply to Lurch's Post:XXXXX1998 ford explorer

Still need:

Which engine does your Explorer have?

Customer: replied 10 years ago.
Reply to Lurch's Post: 4.0 L V6    (4000 CC) engine for 1998 ford explorer
  1. Disconnect the battery ground cable.
  2. Remove the air cleaner outlet tube.
  3. Remove the drive belt.
  4. Disconnect the electrical connectors
  5. Remove the wiring harness-to-generator pushpin
  6. Remove the bolts.
  7. Remove the generator.


  • Follow removal procedure in reverse order.
  • NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

    Lurch and 3 other Ford Specialists are ready to help you
    Customer: replied 10 years ago.
    Thanks for the help!! No further questions, schematic was great!

    Sorry for the slow reply........Computer probleem

    THANK YOU Very Much..

    Thanks for using J/A