How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AMEDEE Your Own Question
Category: Ford
Satisfied Customers: 26441
Experience:  ASE CERTIFIED TECHNICIAN ADVANCED LEVEL SPECIALIST. Wisconsin certified emissions state inspector
Type Your Ford Question Here...
AMEDEE is online now
A new question is answered every 9 seconds

1992 ford explorer: adjust..the base timing..4.0 liter..liter engine

Resolved Question:

how do i adjust the base timing on a 1992 ford explorer with 4.0 liter engine. the specification is 10b.,but after checking it, it is aprox 18b. it does advance properly. it does have a pre-ignition problem at full throttle
Submitted: 10 years ago.
Category: Ford
Expert:  AMEDEE replied 10 years ago.
Ignition Timing Specifications 10 deg BTDC
Note: Not Adjustable. Measured with in-line spout connector shorting bar disconnected.

There are no adjustments in the EDIS ignition system. The timing is set at 10 degrees at the factory and is not adjustable.

Customer: replied 10 years ago.
the timing is not set at 10 deg btdc. that is the problem
Expert:  AMEDEE replied 10 years ago.
Did you disconnect the in line spout connector when checking base timing?
AMEDEE and 5 other Ford Specialists are ready to help you